Catalogue variants
Power configurations shown
- 1200 W
- 2000 W
Compact continuous configuration
Air-Cooled Continuous Laser Cleaning Machine
A continuous-wave configuration for applications that need a compact air-cooled setup. Confirm material condition, coverage path and operating environment through sample testing or quotation review.
Back to Continuous laser cleaning
Selection context
Start with the cleaning condition, then configure the machine
Air-cooled continuous laser cleaning machine with 1200 and 2000 W catalogue configurations.
- Continuous-process evaluation with an air-cooled equipment format
- Defined metal preparation work after a sample review
- Projects where cable reach and process setup need confirmation
Technical parameters
Technical Data
These are values visible in the supplied catalogue. Optional equipment, final electrical requirements and the final application scope are confirmed during quotation.
| Operating mode | Continuous |
|---|---|
| Cooling method | Air cooled |
| Scanning-width options | 10–150 mm / 10–300 mm |
| Focal-length options | 400 / 800 mm |
| Fiber cable | 10 m, customisable in the catalogue |
| Supply voltage | 220 V |
Catalogue configuration context
Use the listed configuration as an evaluation starting point
Continuous-wave configurations in the catalogue are starting points for defined coverage work. The work area, heat response, ventilation and handling sequence need to be evaluated together before a final configuration is specified.
The supplied English catalogue lists this configuration on source page 27. Values shown above are catalogue references for the listed variants. Final suitability, installation requirements and process results remain subject to application review and quotation confirmation.
Project handover
Turn a catalogue option into a documented project scope
Before an order is finalized, record the tested material, contamination or coating, work area, access, intended process settings and the downstream acceptance requirement.
This prevents a catalogue power range or machine format from being treated as a universal cleaning-result promise. Where the result supports coating, welding, bonding or inspection, include that next process in the sample-test or acceptance discussion.
Configuration review
Confirm the configuration against the real part
Send the material, contaminant, dimensions and required next process. LaserLuma will use those details to discuss a practical configuration or sample-testing path.