Catalogue variants
Power configurations shown
- 6000 W
High-power continuous configuration
6000 W Continuous Laser Cleaning Machine
A 6000 W continuous-wave configuration for project-led evaluation. Site conditions, work area, guarding, extraction and the expected process path need to be confirmed before quotation.
Back to Continuous laser cleaning
Selection context
Start with the cleaning condition, then configure the machine
6000 W continuous laser cleaning machine with water cooling, 0–500 mm scanning width and 20 m catalogue fiber cable.
- Project-defined larger cleaning zones
- Workflows that require an evaluated continuous-wave process
- Sites where installation, ventilation and operator-protection scope can be reviewed
Technical parameters
Technical Data
These are values visible in the supplied catalogue. Optional equipment, final electrical requirements and the final application scope are confirmed during quotation.
| Operating mode | Continuous |
|---|---|
| Cooling method | Water cooled |
| Scanning width | 0–500 mm |
| Focal-length options | 800 / 1000 / 1200 / 1500 mm (catalogue options) |
| Fiber cable | 20 m |
| Supply voltage | 380 V |
Catalogue configuration context
Use the listed configuration as an evaluation starting point
Continuous-wave configurations in the catalogue are starting points for defined coverage work. The work area, heat response, ventilation and handling sequence need to be evaluated together before a final configuration is specified.
The supplied English catalogue lists this configuration on source page 25. Values shown above are catalogue references for the listed variants. Final suitability, installation requirements and process results remain subject to application review and quotation confirmation.
Project handover
Turn a catalogue option into a documented project scope
Before an order is finalized, record the tested material, contamination or coating, work area, access, intended process settings and the downstream acceptance requirement.
This prevents a catalogue power range or machine format from being treated as a universal cleaning-result promise. Where the result supports coating, welding, bonding or inspection, include that next process in the sample-test or acceptance discussion.
Configuration review
Confirm the configuration against the real part
Send the material, contaminant, dimensions and required next process. LaserLuma will use those details to discuss a practical configuration or sample-testing path.