Catalogue variants
Power configurations shown
- 100 W
- 200 W
- 300 W
- 500 W
Portable trolley configuration
Luggage-Type Pulse Laser Cleaning Machine
A portable trolley-format pulsed system for defined metal cleaning areas, with the work zone, material condition and downstream process reviewed before a final selection.
Back to Pulse laser cleaning
Selection context
Start with the cleaning condition, then configure the machine
Luggage-type pulse laser cleaning machine with 100–500 W catalogue configurations and air cooling.
- Mobile factory maintenance and targeted cleaning tasks
- Defined metal parts where a trolley format is practical
- Application checks that need a pulse-process evaluation before quotation
Technical parameters
Technical Data
These are values visible in the supplied catalogue. Optional equipment, final electrical requirements and the final application scope are confirmed during quotation.
| Operating mode | Pulse |
|---|---|
| Cooling method | Air cooled |
| Scanning field | 0–100 mm |
| Focal-length options | 100 / 160 / 254 / 330 / 420 mm |
| Fiber cable | 5 m listed in the catalogue |
| Supply voltage | 220 V |
Catalogue configuration context
Use the listed configuration as an evaluation starting point
Pulsed configurations in the catalogue are intended for controlled, defined cleaning zones. The suitable power, cooling, field lens and cable arrangement depend on the actual part rather than the product name alone.
The supplied English catalogue lists this configuration on source page 15. Values shown above are catalogue references for the listed variants. Final suitability, installation requirements and process results remain subject to application review and quotation confirmation.
Project handover
Turn a catalogue option into a documented project scope
Before an order is finalized, record the tested material, contamination or coating, work area, access, intended process settings and the downstream acceptance requirement.
This prevents a catalogue power range or machine format from being treated as a universal cleaning-result promise. Where the result supports coating, welding, bonding or inspection, include that next process in the sample-test or acceptance discussion.
Configuration review
Confirm the configuration against the real part
Send the material, contaminant, dimensions and required next process. LaserLuma will use those details to discuss a practical configuration or sample-testing path.