Catalogue variants
Power configurations shown
- 3000 W continuous + 500 W pulse
Composite process configuration
Composite Laser Cleaning Machine
A quotation-led composite configuration for applications that require continuous and pulsed process options. The material, contaminant, target finish and workflow must be reviewed as one process decision.
Back to Hybrid laser cleaning
Selection context
Start with the cleaning condition, then configure the machine
Composite laser cleaning machine combining a 3000 W continuous source with a 500 W pulsed source in the catalogue configuration.
- Applications that need a process-led continuous and pulse review
- Parts with different cleaning conditions or finishing requirements
- Projects prepared through a technical discussion before quotation
Technical parameters
Technical Data
These are values visible in the supplied catalogue. Optional equipment, final electrical requirements and the final application scope are confirmed during quotation.
| Operating modes | Continuous + pulse |
|---|---|
| Laser powers | 3000 W continuous + 500 W pulse |
| Cooling method | Water cooled + air cooled |
| Scanning width | 10–100 mm |
| Focal-length options | 254 / 330 mm |
| Fiber cable | 10 m, customisable in the catalogue |
Catalogue configuration context
Use the listed configuration as an evaluation starting point
This catalogue configuration combines process options, so the selection should start with the different conditions on the part and the required finish for each zone. It is not a substitute for a documented process review.
The supplied English catalogue lists this configuration on source page 29. Values shown above are catalogue references for the listed variants. Final suitability, installation requirements and process results remain subject to application review and quotation confirmation.
Project handover
Turn a catalogue option into a documented project scope
Before an order is finalized, record the tested material, contamination or coating, work area, access, intended process settings and the downstream acceptance requirement.
This prevents a catalogue power range or machine format from being treated as a universal cleaning-result promise. Where the result supports coating, welding, bonding or inspection, include that next process in the sample-test or acceptance discussion.
Configuration review
Confirm the configuration against the real part
Send the material, contaminant, dimensions and required next process. LaserLuma will use those details to discuss a practical configuration or sample-testing path.